Raising a house off its present foundation and setting it on new, higher ones is known as “house raising.” But we imagine you already knew that.
Depending on the reason for the elevation and the structural integrity of the structure, the amount your property is elevated might range from 5 inches to 12 feet.
House jacking is also known as building jacking or house raising.
If you want to boost your home’s value and add extra space (a finished basement) without sacrificing too much outside space, consider elevating your home with Deanos.
It’s a creative approach to creating space where there was none before, and it may be a low-cost option for rearranging the aesthetics of your home.
Knowing How to Raise a House
Raising a home entails nothing more than reinforcing its foundation. Enhance the dwelling by raising it. Stack. Heave it back up. Repeat.
In reality, there is a little more to it than that, but that’s the gist of it.
Most house restumping adheres to a standard technique of placing cribbing beneath the property once it has been lifted using synchronised jacks and steel beams.
There are stages to this procedure. Here, cribbing and hydraulic jacks are necessary to raise the house off the ground.
During the elevation process, the house-lifters disassemble the house from its foundations and raise it off the ground using hydraulic jacks. After that, they are propped up by temporary constructions called cribs until the new or extended foundation is finished.
To begin, holes are drilled regularly in the foundation wall so that steel beams may be set up in their proper positions under the floor.
Each beam is set up such that its length is perpendicular to the surface below it. The second set of beams is laid up just under the first set, perpendicular to it.
Once every steel beam and jack is in place, the lifting process can begin. Because each jack has a maximum extension height, the house and hydraulic jacks are supported sporadically when the jacks are lifted. After the house has been lifted to the proper elevation, cribbing is used once again to keep it from falling over while the new foundation walls are built.
The jacks are positioned evenly below the house and coupled to a single hydraulic jacking system that can lift every jack precisely at the exact moment. The steel beams are removed, and the holes they made are filled up before the home is moved onto its new foundation.
This strategy works well for houses with either an open foundation, a crawlspace, or a partially finished basement.
Residents now have access to fresh options for home improvement.
Our research shows that although the primary motivation for house raising is aesthetic (people desire more headroom), many others raise their homes to fix unforeseen structural issues, including (imminent) foundation damage due to settlement or movement.
To rebuild the foundation entirely, the home will usually need to be lifted.
This is because, depending on the structure’s condition, raising the house is the only safe way to make some foundation renovations.
The primary arguments in favour of a home’s elevation are as follows:
You may be one of the many residents considering doing their basement finishing. Could that be an office? Or a tiny fitness centre.
Those who are set on staying in their current community frequently want to expand their existing homes to accommodate their professional or recreational needs.
With house raising, you may easily convert the space beneath your home into a functional workplace. A basement may be designed from scratch, or an existing basement can be expanded or renovated to meet your specific needs.